Description

LGA1700 Socket: Supports the 13th and 12th Generation Intel® Core™, Pentium® Gold, and Celeron® Processors. The L3 cache varies depending on the CPU.

Please refer to the “CPU Support List” for more detailed information.

Chipset:
The Intel® Z790 Express Chipset.

Memory:
Supports DDR5 7600(O.C.) / 7400(O.C.) / 7200(O.C.) / 7000(O.C.) / 6800(O.C.) / 6600(O.C.) / 6400(O.C.) / 6200(O.C.) / 6000(O.C.) / 5800(O.C.) / 5600(O.C.) / 5400(O.C.) / 5200(O.C.) / 4800 / 4000 memory modules.
Equipped with 4 x DDR5 DIMM sockets, it can support up to 192 GB (48 GB single DIMM capacity) of system memory.
Features a dual-channel memory architecture.
Supports ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operating in non-ECC mode) and non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules.
Also supports Extreme Memory Profile (XMP) memory modules.

For detailed information on supported memory types, data rate (speed), and the number of DRAM modules, please refer to the “Memory Support List.”

Onboard Graphics:
Integrated Graphics Processor-Intel® HD Graphics support.
Includes 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz with support for HDMI 2.0 version and HDCP 2.3.
Also features 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 with support for DisplayPort 1.2 version and HDCP 2.3.

Please note that graphics specifications may vary depending on CPU support.

Audio:
Equipped with Realtek® Audio CODEC.
Supports High Definition Audio.
Provides options for 2/4/5.1/7.1-channel audio.
You can change the functionality of an audio jack using the audio software. To configure 7.1-channel audio, access the audio software for audio settings.
Supports S/PDIF Out.

LAN:
Features Realtek® 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps).

Wireless Communication Module:

Option 1: Intel® Wi-Fi 6E AX210 (PCB rev. 1.0)
– Supports WIFI a, b, g, n, ac, ax, with support for 2.4/5/6 GHz carrier frequency bands.
– Includes BLUETOOTH 5.3.
– Supports 11ax 160MHz wireless standard with up to 2.4 Gbps data rate.

Option 2: Intel® Wi-Fi 6E AX211 (PCB rev. 1.1)
– Supports WIFI a, b, g, n, ac, ax, with support for 2.4/5/6 GHz carrier frequency bands.
– Includes BLUETOOTH 5.3.
– Supports 11ax 160MHz wireless standard with up to 2.4 Gbps data rate.

Please note that the actual data rate may vary depending on the environment and equipment.

Expansion Slots:

CPU:
– 1 x PCI Express x16 slot, supporting PCIe 5.0 and running at x16 (PCIEX16)
– For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot.

Chipset:
– 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4_1)
– 1 x PCI Express x16 slot, supporting PCIe 3.0 and running at x4 (PCIEX4_2)

Storage Interface:

CPU:
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)

Chipset:
– 2 x M.2 connectors (Socket 3, M key, type 22110/2280 PCIe 4.0 x4/x2 SSD support) (M2P_SB, M2Q_SB)
– 1 x M.2 connector (Socket 3, M key, type 22110/2280 SATA and PCIe 4.0 x4/x2 SSD support) (M2M_SB)
– 6 x SATA 6Gb/s connectors
– Please refer to “2-8 Internal Connectors” for installation notices regarding the M.2 and SATA connectors.
– Supports RAID 0, RAID 1, RAID 5, and RAID 10 for NVMe SSD storage devices.
– Supports RAID 0, RAID 1, RAID 5, and RAID 10 for SATA storage devices.

USB:

Chipset:
– 1 x USB Type-C® port on the back panel, with USB 3.2 Gen 2×2 support.
– 1 x USB Type-C® port with USB 3.2 Gen 2 support, available through the internal USB header.
– 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel.
– 5 x USB 3.2 Gen 1 ports (3 ports on the back panel, 2 ports available through the internal USB header).

Chipset + 2 USB 2.0 Hubs:
– 8 x USB 2.0/1.1 ports (4 ports on the back panel, 4 ports available through the internal USB headers).

Internal I/O Connectors:
– 1 x 24-pin ATX main power connector.
– 2 x 8-pin ATX 12V power connectors.
– 1 x CPU fan header.
– 1 x water cooling CPU fan header.
– 3 x system fan headers.
– 1 x system fan/water cooling pump header.
– 2 x addressable LED strip headers.
– 2 x RGB LED strip headers.
– 4 x M.2 Socket 3 connectors.
– 6 x SATA 6Gb/s connectors.
– 1 x front panel header.
– 1 x front panel audio header.
– 1 x USB Type-C® header, with USB 3.2 Gen 2 support.
– 1 x USB 3.2 Gen 1 header.
– 2 x USB 2.0/1.1 headers.
– 2 x Thunderbolt™ add-in card connectors.
– 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0 module only).
– 1 x Q-Flash Plus button.
– 1 x reset button.
– 1 x reset jumper.
– 1 x Clear CMOS jumper.

Back Panel Connectors:
– 4 x USB 2.0/1.1 ports.
– 2 x SMA antenna connectors (2T2R).
– 2 x USB 3.2 Gen 2 Type-A ports (red).
– 1 x DisplayPort.
– 1 x HDMI 2.0 port.
– 3 x USB 3.2 Gen 1 ports.
– 1 x USB Type-C® port, with USB 3.2 Gen 2×2 support.
– 1 x RJ-45 port.
– 1 x optical S/PDIF Out connector.
– 2 x audio jacks.

I/O Controller:
– iTE® I/O Controller Chip.

H/W Monitoring:
– Voltage detection.
– Temperature detection.
– Fan speed detection.
– Water cooling flow rate detection.
– Fan fail warning.
– Fan speed control.
* Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

BIOS:
– 1 x 256 Mbit flash.
– Use of licensed AMI UEFI BIOS.
– PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0.

Unique Features:
– Support for GIGABYTE Control Center (GCC).
* Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
– Support for Q-Flash.
– Support for Q-Flash Plus.
– Support for Smart Backup.

Bundled Software:
– Norton® Internet Security (OEM version).
– LAN bandwidth management software.

Operating System:
– Support for Windows 11 64-bit.
– Support for Windows 10 64-bit.

Form Factor:
– ATX Form Factor; 30.5cm x 24.4cm.