CPU

LGA1200 package:

– 11th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors
– 10th Generation Intel® Core™ i9 processors / Intel® Core™ i7 processors / Intel® Core™ i5 processors / Intel® Core™ i3 processors/ Intel® Pentium® processors / Intel® Celeron® processors* (* Limited to processors with 4 MB Intel® Smart Cache, Intel® Celeron® G5xx5 family.)
– L3 cache varies with CPU

Chipset
– Intel® B560 Express Chipset

Memory
– 11th Generation Intel® Core™ i9/i7/i5 processors: Support for 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200 / 3000 / 2933 / 2800 / 2666 / 2400 / 2133 MHz memory modules
– 10th Generation Intel® Core™ i9/i7 processors: Support for DDR4 2933/2666/2400/2133 MHz memory modules
– 10th Generation Intel® Core™ i5/i3/Pentium®/Celeron® processors: Support for DDR4 2666/2400/2133 MHz memory modules
– 2 x DDR4 DIMM sockets supporting up to 64 GB (32 GB single DIMM capacity) of system memory
– Dual channel memory architecture
– Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode)
– Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules
– Support for Extreme Memory Profile (XMP) memory modules

Onboard Graphics

Integrated Graphics Processor-Intel® HD Graphics support:
– 1 x HDMI port, supporting a maximum resolution of 4096×2160@60 Hz (* Support for HDMI 2.0 version and HDCP 2.3.)
– 1 x DisplayPort, supporting a maximum resolution of 4096×2304@60 Hz (* Support for DisplayPort 1.2 version and HDCP 2.3)
– Graphics specifications may vary depending on CPU support.

Audio
– Realtek® Audio CODEC
– High Definition Audio
– 2/4/5.1/7.1-channel
– To configure 7.1-channel audio, you need to open the audio software and select Device advanced settings > Playback Device to change the default setting first.

LAN
– Intel® 2.5GbE LAN chip (2.5 Gbit/1 Gbit/100 Mbit)

Wireless Communication module
– Intel® Wi-Fi 6 AX200
– WIFI a, b, g, n, ac, ax, supporting 2.4/5 GHz Dual-Band
– BLUETOOTH 5.1
– Support for 11ax 160MHz wireless standard and up to 2.4 Gbps data rate
– Actual data rate may vary depending on environment and equipment.

• 1. Expansion Slots:
     – 1 x PCI Express x16 slot, running at x16 (The PCI Express x16 slot conforms to PCI Express 4.0 standard.)*
     * Supported by 11th Generation processors only.

     Storage Interface:

     CPU:
     – 1 x M.2 connector (Socket 3, M key, type 2260/2280 PCIe 4.0 x4/x2 SSD support) (M2A_CPU)*
     * Supported by 11th Generation processors only.

     Chipset:
     – 1 x M.2 connector on the back of the motherboard (Socket 3, M key, type 2260/2280 SATA and PCIe x4/x2 SSD support) (M2P_SB)
     – 4 x SATA 6Gb/s connectors
     – Intel® Optane™ Memory Ready

     USB:

     Chipset:
     – 2 x USB Type-C® ports, with USB 3.2 Gen 1 support (1 port on the back panel, 1 port available through the internal USB header)
     – 1 x USB 3.2 Gen 2 Type-A port (red) on the back panel
     – 2 x USB 3.2 Gen 1 ports available through the internal USB header
     – 4 x USB 2.0/1.1 ports (2 ports on the back panel, 2 ports available through the internal USB header)

     Chipset+1 USB 3.2 Gen 1 Hub:
     – 4 x USB 3.2 Gen 1 ports on the back panel

     Internal I/O Connectors:
     – 1 x 24-pin ATX main power connector
     – 1 x 8-pin ATX 12V power connector
     – 1 x CPU fan header
     – 2 x system fan headers
     – 1 x addressable LED strip header
     – 1 x RGB LED strip header
     – 4 x SATA 6Gb/s connectors
     – 2 x M.2 Socket 3 connectors
     – 1 x front panel header
     – 1 x front panel audio header
     – 1 x speaker header
     – 1 x USB Type-C® header, with USB 3.2 Gen 1 support
     – 1 x USB 3.2 Gen 1 header
     – 1 x USB 2.0/1.1 header
     – 1 x Clear CMOS jumper
     – 1 x chassis intrusion header
     – All fan headers are subject to support AIO_Pump, Pump, and high-performance fans with the capability of delivering up to 2A/12V @ 24W.

     Back Panel Connectors:
     – 1 x DisplayPort
     – 1 x HDMI port
     – 1 x USB Type-C® port, with USB 3.2 Gen 1 support
     – 1 x USB 3.2 Gen 2 Type-A port (red)
     – 4 x USB 3.2 Gen 1 ports
     – 2 x USB 2.0/1.1 ports
     – 1 x Q-Flash Plus button
     – 1 x RJ-45 port
     – 2 x SMA antenna connectors (2T2R)
     – 3 x audio jacks

     I/O Controller:
     – iTE® I/O Controller Chip

     H/W Monitoring:
     – Voltage detection
     – Temperature detection
     – Fan speed detection
     – Fan fail warning
     – Fan speed control
     * Whether the fan speed control function is supported will depend on the cooler you install.

     BIOS:
     – 1 x 256 Mbit flash
     – Use of licensed AMI UEFI BIOS
     – PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI5.0

     Unique Features:
     – Support for APP Center
     * Available applications in APP Center may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.
     – @BIOS
     – EasyTune
     – Fast Boot
     – Game Boost
     – ON/OFF Charge
     – RGB Fusion
     – Smart Backup
     – System Information Viewer
     – Support for Q-Flash Plus
     – Support for Q-Flash
     – Support for Xpress Install

     Bundled Software:
     – Norton® Internet Security (OEM version)
     – cFosSpeed

     Operating System:
     – Support for Windows 10 64-bit

     Form Factor:
     – Mini-ITX Form Factor; 17.0cm x 17.0cm